How To Watch Video From Kmodo Surveillance Camera On Windows 10

January 18, 2019.

We're often asked how to change an IP camera'south video settings once you lot already accept it up and running on your NVR. This process tin be difficult without any cognition of reckoner networking or setting upwardly a standalone IP camera. In this article we explain the technical details of taking a camera from the dorsum of your NVR and connecting to information technology with either a direct connection or through your network.

Removing the Camera from the NVR

Our IP security cameras take a plethora of settings that can be accessed from the camera'southward born web interface. When a photographic camera is continued to a NVR with built-in PoE, it receives IP address and configuration settings from the NVR to keep it on an internal network. While this is great for network security reasons, it prevents straight access to the web interface of the photographic camera. If the user wants to change the photographic camera's shutter charge per unit, or IR LED strength, the camera would need to be disconnected from the NVR and accessed from a computer.

The starting time steps include agreement how a camera and PoE NVR work together, noting the IP address the camera is configured to and finally physically removing the photographic camera from the NVR. The video beneath discusses these concepts in detail.

After having a grasp on the basics and noting the IP address of your photographic camera yous can then go on to the side by side steps. At that place are two ways that you lot can connect to a photographic camera'southward web interface:

1. 1. The starting time is through a straight connection into your Windows desktop or laptop that has an ethernet port.
   2. The 2d involves going over your computer network by configuring the camera to communicate on the network.

Be certain to annotation the IP address of the photographic camera before disconnecting it from the NVR, you lot will need information technology subsequently.

A) Direct connection between IP photographic camera and Figurer

The easiest fashion to access an IP photographic camera is by connecting to it directly from a computer. This method requires you have the following:

1. The IP address of your camera from the NVR registration page
2. PoE Injector or 12VDC 1A Power Adapter. It is very of import to use a CCTV Camera Earth canonical device or y'all risk frying the camera due to incorrect voltage
3. Two Ethernet cables (ane if using a power adapter)
4. Windows x based PC

The below video shows the entire procedure from get-go to finish.

1. Use a PoE injector to supply power and data

A PoE injector will have two ports, one labeled for PoE or P+D/Out (power and information) and one labeled LAN or Data/In. Connect the PoE injector to a power outlet. Connect an ethernet cable from your PC'due south network port to the Information/In on the PoE injector. Connect a second ethernet cable from the network camera's RJ45 network jack to the port labeled PoE or P+D/Out. To check if everything is connected properly refer to the lights on the PoE injector and the port on your computer. If you practice non see whatsoever indication lights yous may take a bad cable or practice non take the wires continued properly.

ii. Use a 12VDC 1A ability adapter

A correct power adapter volition have a label stating information technology is 12VDC 1000mA. If yous have whatsoever concerns virtually the correct ability supply please feel free to email our support squad. Power the photographic camera by connecting the adapter. Connect an ethernet cable from the camera direct to your calculator'south ethernet port. A good way to check if the camera is receiving ability and communicating with your reckoner is to wait at the lights on your reckoner's port. If you have no lights it is important to exam that your cablevision and power supply piece of work with another device.

iii. Configure your PC's network port to communicate with the camera

For your computer to "speak" to your camera, y'all demand to gear up its network port to the aforementioned IP address scheme as the camera. Earlier nosotros disconnected the photographic camera from the back of the NVR, nosotros noted what the IP accost of the camera was.

Login to your Windows PC, change your computer's ethernet adapter to communicate with the photographic camera. Use the Network & Internet settings which contains an Ethernet department. Using the modify adapter settings set an IP address for your reckoner that matches the network for the photographic camera. If you do not know how to do this refer to the video above for this step.

4. Exam the connection with the Ping command

After powering the photographic camera and configuring your computer to talk with information technology, it is proficient practice to test the connection using the Ping command. Simply open the Command Prompt and type Ping with the accost of the camera. In our instance we used the following control: ping 10.1.1.65

5. Admission the camera using Cyberspace Explorer

It is of import to use Internet Explorer as information technology is the most uniform browser for accessing security cameras. Type the IP address of your camera into the address bar in Internet Explorer. Some cameras may require initialization and information technology is recommended to uncheck the Easy4IP and auto-update options when proceeding through the prompts. The password can exist admin, or may be printed on the label establish on the box of the camera. Notation: the customer is responsible for whatsoever password alter beyond the defaults. At that place is no chief reset password.

Later on successfully logging into the camera you need to install a plugin to view the camera. Click the link in the center of the page to download the plugin. Make sure to Run and do not save the plugin download. Net Explorer will prompt you to allow the plugin to run. Once the plugin is installed, you will be required to log dorsum into the camera. You should now see video from your camera and can modify the settings of the camera in the Setting tab inside your browser. Make sure when you are done modifying your photographic camera(s) that you change your network settings back to "Obtain IP address automatically" in your network settings, this is demonstrated in the video above.

B) Accessing the camera over your network

Likewise direct connectedness to a reckoner, the other method to connect to a PoE security photographic camera is over the network. This method requires the following pre-requisites:

1. A home or business network with router
2. Windows PC with ConfigTool installed
3. PoE Injector or 12VDC 1A ability adapter
4. A network cable to connect to your router
5. The IP address of your camera

The video below shows the procedure in detail.

one. Power the camera like you would for the previous method

Every bit shown in the video, you can use a PoE injector or 12V DC 1amp power adapter to ability the camera and connect to your network router or switch. The process is simple. It is very important to use a CCTV Camera World approved device or you risk frying the camera due to incorrect voltage.

ii. Connect the photographic camera to your network router

Instead of connecting the camera straight to your computer, you lot will connect it to your network router then the computer can communicate with the photographic camera over the network. When following this guide, it is important to connect the camera and computer to the aforementioned router or switch. Nosotros advise using a hardwired connection between the computer and the router to prevent a situation where your WiFi network is different from the wired network. If you are knowledgeable nigh your network setup, feel free to utilize a WiFi laptop.

3. Employ the ConfigTool to observe the camera and modify its IP accost

Using the ConfigTool to find the photographic camera on your network is fairly easy and is covered in our guide on how to connect a network surveillance camera to a computer. It is imperative that yous turn off whatsoever firewall or antivirus program on your computer that may prevent the program from sniffing your network.

4. Access the camera's spider web interface using Internet Explorer

The steps are like to method A considering the spider web interface will exist the aforementioned regardless of how you connect to the camera.

Matt Rossi is a Technical Support Director at CCTV Camera World, a leading CCTV Camera distributor located in Buffalo, NY. He is a technical support good for everything video surveillance related.

Connect with Matt via: Facebook

Source: https://www.cctvcameraworld.com/access-poe-security-camera-from-computer/

Posted by: browntheared.blogspot.com

Share this post